What to Do If Your Computer Does Not Start

Posted on by Randall J. Lopez

1. No Access to the Keyboard During the Boot Process?

Help, I cannot get admission to my keyboard to boot!

If this is the case, I would advocate:

1-1. If the use of a USB keyboard, plug the keyboard into the number one USB ports on the back of the laptop (at the motherboard). Restart the computer and try again.

1-2. Try another regarded running USB keyboard plugged into the number one USB ports on the lower back of the computer (on a motherboard). Restart the pc and attempt again.computer

1-three. Try some other recognized running PS/2 keyboard, restart the pc and try again.

1-4. If the use of a PS/2 Keyboard, try replacing your keyboard with a USB keyboard, restart the computer and attempt once more.

1-five. If these steps fail, take away your keyboard connection and close the pc off with the energy button. While pc is off, plug the keyboard back into the laptop and start the computer.

Still, does not work? Please go to “I need to flash my bios” segment and proceed with flashing your bios.

2. Does Your Computer Freeze at Bios?

Why is my laptop frozen?!

2-1. Remove all devices out of your computer including detachable hard drives, extra USB gadgets, and printers and faxes. Restart the pc and strive again. If no end result, visit step 2-2.

2-2. If you could see your bios display, please faucet the important thing to go into your bios settings. While inner of bios, make sure that your hard power, memory and video card ( is relevant) are detected. If it isn’t, attempt re-seating or replacing the unit that is not being detected. If no result, go to step 2-three.

2-3. While searching in bios and all of your hardware is getting detected k, please reset the bios returned to its default settings and select “shop and quit.” The laptop will restart and you should be searching on the running device loading page at this factor. If no result, visit step 2-4.does not

2-4. Open the computer, get rid of all however 1 memory module (generally closest to the CPU) and disconnect all tough drives. Also, disconnect and PCI or AGP add-on cards and start your laptop. If you spot “operating gadget now not found” or a similar message, development has been made. Then begin including returned 1 object at a time, restarting the pc after each object to see whilst it fails.

If these steps nonetheless may not work, please continue to the “I need to flash my bios” section.

Three. Computer Beeping Noises on Power Up

No data on screen and laptop yelling at you?

Three-1. If your computer is beeping at beginning up and also you are not seeing something on your display screen. There is a hardware hassle together with your laptop. Please take a look at your motherboard or computer manufacturers internet site for bios code meanings. If this is not possible, the first element to try is get rid of all sticks of memory except for one, restart your laptop and attempt again. If no result, please visit step 3-2.

3-2. If removed and tested all reminiscence, please disconnect all internal connections EXCEPT for Power supply connections, Video card connections and the Power switch (PSW). Also leaving 1 stick of memory, heatsinks and enthusiasts plugged in as well, restart the pc and attempt once more. If no result, please visit step three-three.

Three-three. If you have a video card installed and have onboard video as nicely, please dispose of the video card and the power connection to that card. Hook the video cable on your onboard video connection. Restart your computer and try again. If no result, visit step 3-four.

READ MORE : 

Three-four. If the beeping still exists, Try replacing the reminiscence with a known operating module. Restart the pc and attempt once more, if no result, please update the motherboard and try once more. If nonetheless no result, go to step 3-five.

Three-five. If beeping still exists, replace the processor and add best the necessary connections ( Power supply connections, Video card connections and the Power switch (PSW). Also leaving 1 stick of reminiscence, heatsinks, and lovers plugged in as well ). Start the laptop and try again.start

Note: If all steps do now not paintings, please evaluate the steps one greater time, if the laptop continues to be beeping at startup, please contact a neighborhood laptop restore technician.

4. Windows Was Unable to Start?

Unmountable volume, home windows did not start effectively?

Four-1. First, you must strive “begin Windows generally.” If this does not deliver you lower back into Windows, flow to step four-2.

Four-2. Choose the “Use final acknowledged true configuration”, you ought to be capable of boot returned into Windows at this point, if now not continue to step 4-three.

4-3. Choose “Repair” as an option and permit the computer go through its motions, your computer can also restart a couple of instances in the system. You ought to now be able to get again into Windows, if now not please proceed to step four-4.

4-four. You will need in addition from a Windows installation DVD or boot-in a position USB with the installation documents on it. Make sure to press the ok key at bios to view / alternate boot options. Boot the DVD / USB, pick out restore and then choose your Windows set up the directory. If triggered with a command spark off, type “chkdsk /r” and then press input. If no end result, pass to step four-five.

Four-5. If any other laptop is available, please put off the tough pressure from the affected computer, insert the difficult pressure into the running laptop as a slave ( making the proper jumper configuration exchange on the primary and slave drive). Then boot into Windows the usage of your acknowledged operating hard force, then try and recover as a great deal personal data as viable and keep it at the regarded running hard pressure. If every other computer is unavailable or this doesn’t work for you, please continue to step 4-6.

Four-6. Attach a removable storage medium ( detachable difficult pressure ) Boot to a recuperation software application or Live CD the use of your DVD drive or USB pressure. A few of these utilities are Hiren’s Boot CD, Ultimate Boot CD, Knoppix, and Ubuntu. Access your hard drive from this software and returned up all your private documents and statistics. Then effectively take away your removable hard pressure, restart your computer and hit F11 or Ctrl + F11 again and again when you have a manufacturing unit established windows restoration partition. Or if you have a DVD Windows setup disc insert this disc at startup. Choose the “installation” choice and deploy over your antique broken Windows installation.

Note: If the above will not work, please touch a local pc restore technician.

5. I Need to Flash My Bios!

Bios corrupted, appearing extraordinary?

5-1. Obtain your bios well-matched documents. Most of the time, you can get those files from the manufacturer’s internet site. Just look for the files on their internet site using your version # of your computer or service tag.

5-2. Create a boot-in a position floppy drive together with your bios documents. Then manually reproduction the bios files onto the floppy drive, eject the floppy force and insert it into the bothered laptop and start the pc up. Press the precise key to get entry to your boot menu whilst the computer is commencing, pick out your floppy force. If the whole thing is going to devise, you must see a command activated. Follow your producers commands on how to flash the bios. If you do now not have a floppy force, continue to 5-3.

Five-3. Create a bootable USB with your bios files on it. One utility to get this process finished could be HP’s USB Storage Format Tool. Then manually replica the bios documents onto the USB power, eject the USB force and insert it into the computer and begin the pc up. Press the specific key to get admission to your boot menu while the computer is setting out, pick your USB power. If the whole thing goes to a plot, you should see a command spark off. Follow your producers commands on how to flash the bios. If you do now not have a USB force, continue to five-4.

5-four. Create a boot-capable DVD along with your bios files on it. When making your iso, copy the bios files into the ISO earlier than compiling. Burn the DVD, eject the DVD and insert it into the troubled computer and begin the laptop up. Press the specific key to access your boot menu while the pc is starting off. Choose your DVD power. If everything goes to the plot, you need to see a command spark off. Follow your producers commands on how to flash the bios.